NLSH ohf.ReykjavíkTED
Diesel Rotary Uninterruptible Power Supply system - DRUPS / RUPS
The New National Hospital (NLSH) project reg.nr. 500810-0410 in Iceland hereby invites interested tenderer's to participate in this invitation to tender (ITT) for The New National Hospital regarding the purchase of DRUPS Backup power generator system for NLSH. NLSH is constructing new buildings for the National Hospital Landspítali - Univ...
Generators
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- NLSH ohf.
- Published:
- August 04, 2026
- Deadline:
- September 14, 2026
- Topic:
- Generators
Tender description
Show full descriptionCollapse description
The New National Hospital (NLSH) project reg.nr. 500810-0410 in Iceland hereby invites interested tenderer's to participate in this invitation to tender (ITT) for The New National Hospital regarding the purchase of DRUPS Backup power generator system for NLSH. NLSH is constructing new buildings for the National Hospital Landspítali - University Hospital (LSH) at the NLSH Campus in Reykjavik, Iceland. NLSH will install a new 11 kV distribution system for power distribution at the NLSH Campus. A part of this system are Rotary Uninterruptable Power Supply devices with a diesel generator (DRUPS or RUPS+ diesel generator) installation for backup of the total 11 kV power system, hereinafter abbreviated DRUPS in this document. The DRUPS system must communicate and be controllable through the Protection and Control system (P&C) which is being installed at the NLSH Campus. In the tender documents when referred to DRUPS system, the variant proposed can be of either DRUPS or RUPS variant. However, the reference will be DRUPS.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10Contract Contract 4601 Disruption free emergency power supply DRUPS - New Aker
Helse Sør-Øst RHFHAMARThe main elements of the assignment are engineering design, delivery, assembly, testing and commissioning of 6 new DRUPS installations with the accompanying auxiliary installations that shall be installed as a part of the emergency power system AK1 and AK2. The aim is to use innovative systems without this affecting the quality and robustness of the system. The facility shall be prepared for, and equipped with, technology and infrastructure that increases the building's future value for users, owners and communities.Onshore Power Supply for Cruise (OPS)
Faxaflóahafnir sf.ReykjavíkDeadline: Jul 27The Owner intends to install two (2) Onshore Power Supply (OPS) systems, each rated at 12 MVA. Power supply from grid supply at 33 kV, output from OPS shall be 11/6.6 kV and capable of operating at 50/60 Hz. The installation will comprise two connection zones, and each zone will have three (3) connection points serving a single cruise ship. The Owner is seeking modular solution-based on up to a maximum container size of 30-foot modules stackable to a maximum height of three. The design shall consider all applicable load conditions and seismic forces that the structure may be subjected to, according to specification in this document and other applicable specifications. The OPS containers assembly will be enclosed with a structure which will be built by Other. This tender is for the OPS power transformation system, and electrical engineering for shore side connection cabinets, and the overall testing of the systems. This is better described in document “101462-010-SPE-001 technical specification”.Purchase of a high-voltage shore connection (HVSC) including an onshore power system (OPS) and a cable management system (CMS) for the supply of electrical power to cruise ships in Port of Skagen.
Skagen HavnSkagenOn shore power for cruise ships shall be established at the cruise quay Krydstogtkajen in Port of Skagen, 9990 Skagen, Denmark. For this purpose, the Contractor shall deliver a high-voltage shore connection (HVSC) including an onshore power system (OPS) and a cable management system (CMS). The HVSC shall be able to deliver up till 16 MVA of high-voltage onshore power to at least one cruise ship at a time. The Deliverables include a complete converter station and a complete cable management solution from the OPS on to the quay front. The converter station shall be a container-based solution, where all components are to be placed inside containers, except coolers that shall be placed on the ground outside the building, which the Purchaser will build around the containers. The Contractor shall be responsible for groundwork for the CMS. The Contractor shall deliver all necessary documentation and perform training of the personnel who shall operate the HVSC upon Delivery. The HVSC shall be operational by 1st of November 2027. Definitions: High-voltage Shore Connection (HVSC): includes the Onshore Power System (OPS), the Cable Management System (CMS) and the high voltage cable distribution system from the OPS to the quay front. Onshore Power System (OPS): includes all the components necessary to transform, convert and monitor the power on shore, including, but not limited to, transformers, converters, switch gear, breakers and control, monitoring, interlocking and power management systems. Cable Management System (CMS): includes all work, cables and equipment needed from the OPS to the quay front for delivering power to the ships. This includes HV shore distribution systems (from the OPS), shore-to-ship connection and interface equipment and other items necessary for delivering power to the cruise ships. Maintenance: All maintenance necessary for the proper functioning of the HVSC shall be performed by the Contractor during the warranty period. The length of the warrantyTenneT Qualification System (TQS) Gas-Insulated Switchgear (GIS) and Gas-Insulated Line (GIL) NL
TenneT TSO B.V.ArnhemDeadline: Aug 12This qualification system is being introduced to be able to qualify suppliers for future tenders for (project and/or framework) agreements for Gas-Insulated Switchgear (GIS) and Gas-Insulated Line (GIL) for 72,5 kV, 145 kV, 170 kV, 245 kV and 420 kV for TenneT TSO B.V. in the Netherlands. The present Qualification System is intended to replace the EU-111 Qualification System, as set out in TED notice 2020/S 125-307189. With regard to the former EU-111 Qualification System, a transitional period applies for parties qualified under that Qualification System, in which new parties also may apply for qualification and have time to get qualified. At the latest 18 months after the publication of this EU-490 Qualification System, the EU-111 Qualification System will cease to apply. It is at TenneT’s sole and only discretion to determine, in the event of a tender with the same scope as the Qualification Systems to be held during the transitional period, whether that tender is to be conducted under the old EU-111 Qualification System or the new EU-490 Qualification System. Note: If you were qualified in the old EU-111 Qualification System, this doesn't mean you are automatically qualified in the new EU-490 Qualification System. TenneT values the confidentiality of all provided information and documents in this qualification system. For this matter TenneT requires from a Candidate a signed version of the attached NDA before providing access to the TenneT Qualification System. The Candidate is requested to forward the signed version to the contact person of TenneT as stated in the most recent TED-Notice: [email protected] For more details please see the manual in the survey.CON1199 - Qualification System for Electrical Distribution Substation Works
Electricity Supply BoardDublinDeadline: Jul 08The Contracting Entity is seeking expressions of interest from economic operators seeking entry on to a Qualification System that will be established for the subsequent procurement of engineering, civil, design, equipment and material supply, operation, maintenance and construction services related to electrical power distribution assets (mainly within substations but also power distribution cables, ring main units, mini-pillars and other associated assets throughout the distribution network ), up to 110 kV voltage level. The works will be located in the Republic of Ireland. The Qualification System gives contractors the opportunity to express their interest in tendering for these works which may arise. While applications may be made to join the Qualification System at any time, those interested in being considered for the Initial Framework (the “First Procurement”) under this Qualification System should submit a completed QSQ response on or before 1200 hrs (local time) on Friday 10th July 2026 (the “First Procurement Closing Date”).LOT 2: 1 unit of Power Supply for SIS100 Fast Quadrupole Magnet
FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtShort Description of Power Supply for SIS100 Fast Quadrupole Magnet A new international scientific research centre facility FAIR (Facility for Antiprotons and Ion Research) is under constructed next to the existing GSI Helmholtz Centre for Heavy Ion Research. FAIR will provide antiproton and ion beams of unprecedented intensity and quality. One of the essential parts of FAIR will be the Heavy Ion Synchrotron (SIS)100. Fast Quadrupole Magnet is a component of SIS100 and it requires a power supply system. The current in the magnet must be ramped up to 1485 A with an absolute accuracy of 1 x 10-4 *IN. The maximum output voltage is of about 210 V. This power converter will be feed by 400 V supply system.Construction of the New Carpentry Workshop at Queen Elizabeth Hospital, Barbados
United Nations Office for Project Services (UNOPS)BridgetownDeadline: Jul 08UNOPS, on behalf of the Ministry of Health and Wellness (MHW) of Barbados, is implementing the Queen Elizabeth Hospital strengthening and improvement support project. As part of the implementation of the project, the objective of this Invitation to Bid (ITB) is to establish a Contract for the Construction of the New Carpentry Workshop at Queen Elizabeth Hospital, Barbados This ITB refers to the Construction of the New Carpentry Workshop at Queen Elizabeth Hospital, Barbados, as further described in the document titled Section II: Schedule of Requirements, included in the Documents section. The tender process consists of a single lot. The procurement documents are available for unrestricted and full direct access, free of charge, at (URL): https://www.ungm.org/Public/Notice/303298GN/DPS/T/3101/2024 (10372) Supply and Installation of Fire-Resistant Doors and Multi-Door System at Delimara Power Station
Enemalta plcMarsaThe subject of this tender is the supply and installation of fire-resistant doors and multi-door system at Delimara Power Station.Supply and Maintenance of Non-Destructive Assay System for Radioactive Waste Measurement
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Jul 25NDA system needed for the measurements of radioactive waste and waste for clearance. Characterization of waste leaving the nuclear controlled areas is a legal obligation. The currently used system is at end of life and for complying with the legal requirements an new system needs to be installed.Architectural Design Services for the provision of Modular accommodation at the College of FET, Kilmallock Town Campus, Kilmallock, Co Limerick
Limerick and Clare Education and Training BoardEnnisDeadline: Jul 31This project consists of the removal of two existing prefabricated units and the design and installation of a new modular unit designed to accommodate the campus needs. Refer to tender documents for further details.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 14. September 2026.
- Who is the contracting authority?
- The contracting authority is NLSH ohf..
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.