Lunds universitetLundTED
Amplified laser system
Beschaffung eines verstärkten Lasersystems
Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Lunds universitet
- Published:
- June 28, 2026
- Deadline:
- Not specified
- Topic:
- Laboratory Instruments
Tender description
Beschaffung eines verstärkten Lasersystems
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock3 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10Beschaffung eines Hochleistungslasersystem: 10 kW-Ytterbium-Laser für Laserradiometrie gem. Leistungsbeschreibung
Physikalisch - Technische Bundesanstalt BraunschweigDeadline: Jun 16Beschaffung eines 10 kW-Ytterbium-Lasersystems für Laserradiometrie durch die Physikalisch-Technische Bundesanstalt Braunschweig gemäß Leistungsbeschreibung.Laser Tracker System für TRON Labor
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)KölnBeschaffung eines Laser Tracker Systems für TRON Labor im DLR-Institut für Raumfahrtsysteme in Bremen.Titan:Saphir-Lasersystem zur Spektroskopie von CsAg-Molekülen
Technische Universität WienWienBeschaffung eines Titan:Saphir-Lasersystems für die spektroskopische Untersuchung von CsAg-Molekülen.Beschaffung eines Lasersystems FBH-2026-0016
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinBeschaffung eines Lasersystems mitsamt digitaler Steuer- und Kontrollelektronik für die Zentralwellenlänge von 1556.2 nm.Abstimmbarer gepulster Laser für Rack-System (3U)
Universität StuttgartStuttgartGegenstand der Beschaffung ist ein abstimmbarer gepulster Laser, der außerdem direkt in ein Rack-System (d.h. einen 3U-Steckplatz) eingebaut werden kann.Hochleistungs-Laser-System mit veränderbarer Wellenlänge
Otto-von-Guericke-Universität Magdeburg, Abt. Beschaffung, Zahlstelle (K13)Deadline: Jun 24Beschaffung eines Hochleistungs‑Laser‑Systems mit veränderbarer Wellenlänge für diverse laser‑optische Messverfahren in Forschung und Lehre. Menge: 1 Stück, Budget 56.000 € brutto. Lieferort: Otto‑von‑Guericke‑Universität Magdeburg, Universitätsplatz 2, 39106 Magdeburg. Keine Losaufteilung, Nebenangebote nicht zulässig. Angebote ausschließlich elektronisch, Einreichungsfrist 24.06.2026 24:00 Uhr.Laser lithography system
Uppsala universitetUppsalaEin Laser-Lithografie-System zur Herstellung von Mikrostrukturen und -muster auf Halbleiter- und anderen Materialien wird beschafft. Der Umfang umfasst die Lieferung und Installation des Systems, einschließlich aller notwendigen Software und Zubehörteile. Die Menge beträgt 1 Stück. Die Lieferung erfolgt an einen Standort in Deutschland. Die Frist für die Lieferung ist 12 Wochen. Es werden keine Losangaben gemacht. Die technischen Details sind nicht spezifiziert.Photocathode Laser System
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenHelmholtz-Zentrum Dresden-Rossendorf (HZDR) has been working on the development of a superconducting electron source (SRF gun) for about 20 years. An integral part of this electron source is a photocathode laser which, in combination with a photocathode, uses the external photoelectric effect to generate electron pulses. These pulses are then accelerated by the electric field of the superconducting RF resonator. The required laser wavelength for this purpose is about 260 nm, while the aimed pulse energy at this wavelength is 5 μJ. Detailed requirements in the table below (2. Performance quote) are specified separately for the fundamental wavelength in infrared (IR) and the 4th harmonic in ultraviolet (UV). Pulse repetition rate shall be flexible and reach 2 MHz. The average power in UV has to reach at least 1 W. Laser pulse duration is a key optimization parameter that needs to be variable in the range of 0.3-10 ps FWHM. Moreover, the temporal (longitudinal) profile of the laser pulse overall is important for properties of the generated electron pulse and thus also needs to be adjustable. For this, a spatial light modulator for modifying the spectrum needs to be integrated in the offered system. It is desirable that the manufacturer finds settings of the spectral shaper that result in a flat-top temporal shape of the UV pulse. Given that the temporal shape of a chirped pulse is critical in the planned application, spectral smoothness, stability and absence of long wings or shoulders are of high importance. Spectrum distortions caused by nonlinear effects shall be insignificant even at the maximum required pulse energy. Ability to synchronize the oscillators' repetition rate to a radio-frequency (RF) reference signal is necessary. Achievable integrated time jitter in the range between 10 Hz and 1 MHz of the laser with respect to the reference shall not exceed 100 fs. However, synchronization electronics are not part of the current tender and will be obtained from another source. The oscillator needs to be prepared for repetition rate locking, i.e. contain a short-range and a long-range actuators for fine adjustment of the cavity length. Another aspect of synchronization is the ability to control the repetition rate and the emission time of the laser by an external trigger signal. This ability needs to be available. Reliability and permanent availability (24/7) are of particular importance. The system will be located in an optical laboratory with ±1°C temperature stability. Beside the fulfilment of the criteria described in annex 01A, the scope of deliveries and services includes, that means are to be offered in the quotation: • Factory Acceptance Test (FAT), with proof of fulfilment of the performance requirements • Delivery according to DDP (Incoterms 2010) to the place of usage • Installation und commissioning including On-Site Acceptance Test (OSAT), with proof of fulfilment of the performance requirements • 12 months warranty from OSAT • CE marking • complete manual in English • suitable "water-to-water chiller"795nm Laser System
Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) - OberpfaffenhofenWeßlingDeadline: Aug 31Am Institut für Quantentechnologie in Ulm, wird ein Lasersystem benötigt, um ein Quantenmemorytestsystem mit Rubidiumgas aufzubauen. Um einen Quantenspeicher zu bauen, werden zwei Laserdioden mit schmaler Linienbreite benötigt. Diese beiden Laser müssen auf leicht unterschiedlichen Frequenzen betrieben werden, die präzise zueinander justiert sind, um zunächst den ‚Signalübergang‘ und anschließend den ‚Steuerübergang‘ in Rubidium-87 anzusprechen. Die Laser müssen zwei bestimmte Übergänge der D1-Linie von Rubidium-87 anregen. Mindestens einer der beiden Laser muss auf eine der beiden atomaren Linien stabilisiert sein; der zweite Laser wird entweder auf die andere Linie oder vorzugsweise phasengekoppelt mit dem ersten Laser unter einem Frequenzversatz von 6,835 GHz (sogenanntes ‚Offset-Locking‘) betrieben, wobei diese Kopplung durch eine Mikrowellenfrequenzreferenz gesteuert wird. Beide Laser müssen koordiniert werden, weshalb eine gemeinsame Steuerung erforderlich ist. Weitergehende Informationen sind der beigefügten Leistungsbeschreibung (Vertragsunterlagen) zu entnehmen. 795nm Laser SystemFemtosecond Laser System
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenThe requested laser system is an essential component of the terahertz (THz) user facility TELBE at the ELBE Center for High-Power Radiation Sources at the HZDR. At this facility, intense THz pulses from an accelerator-based source are used to excite various kinds of sample materials; the THz-driven dynamics are then probed using optical methods based on ultrashort (femtosecond), intense, carefully tailored and synchronized light pulses. The requested laser infrastructure will serve as the main probe laser with versatile parameters and output options. This laser infrastructure will also serve various purposes apart from probing, such as providing a timing reference, additional optical pump capabilities for 2D spectroscopy experiments. The laser system must consist of the following main components: A) Femtosecond laser oscillator B) Laser amplifier C)Optical parametric amplifier D) Mid-infrared (MIR) source. Beside the fulfillment of the criteria described under 2. Performance quote of Annex 01A, the scope of deliveries and services includes: - delivery at the place of performance - laser installation infrastructure (electricity, cooling water, and optical table) will be provided by HZDR - suitable laser chillers (water-water) included in the delivery - site acceptance test (SAT) - user documentation in English - a 12-month warranty on the entire laser system, including all necessary components, from the date of acceptance (SAT), but no later than 3 months after delivery if acceptance is delayed for reasons beyond the contractor’s control - CE conformity - on-site user training for at least two users
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Lunds universitet.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.