Universitätsklinikum DüsseldorfDüsseldorf
2D/3D Röntgengerät
Für die zeitgemäße Weiterentwicklung der medizinischen und diagnostischen Digitalisierung wird für die Poliklinik für Kieferorthopädie ein multifunktionales Röntgengerät gesucht, das neben der täglichen 2D Basisdiagnostik auch 3D Diagnostik ermöglicht. Nähere Angaben entnehmen Sie bitte aus dem LV.
Submission deadline: September 15, 2026Type: Tender
Medical Imaging, Dental
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Universitätsklinikum Düsseldorf
- Published:
- August 23, 2026
- Deadline:
- September 15, 2026
- Topic:
- Medical Imaging
Tender description
Für die zeitgemäße Weiterentwicklung der medizinischen und diagnostischen Digitalisierung wird für die Poliklinik für Kieferorthopädie ein multifunktionales Röntgengerät gesucht, das neben der täglichen 2D Basisdiagnostik auch 3D Diagnostik ermöglicht. Nähere Angaben entnehmen Sie bitte aus dem LV.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock3 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots
Procedure data
Unlock4 details capturedPublication number · Procedure type · Contract type · Regulation level
Performance locations
Unlock2 details capturedPerformance locations
Related tenders
7Integrated Measurement System for 2D/3D Fluid/Particle Velocity and Surface Deformation (2D/3D-PIV-DIC) for Trinity College Dublin (TCD)
Trinity College Dublin the University of Dublin_336DublinThe Department of Mechanical, Manufacturing and Biomedical Engineering in Trinity College Dublin requires the supply, delivery, installation, and commissioning of an advanced 2D/3D Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) system to support cutting-edge experimental research in fluid dynamics and solid mechanics. The system shall comprise a high-energy pulsed laser, synchronised high-resolution cameras, precision timing and control units, and fully integrated acquisition and analysis software. The solution must be capable of capturing high-accuracy, time-resolved measurements of velocity fields, particle motion, and surface deformation, enabling two-dimensional (2D) and ideally also three-dimensional (3D) analysis. It should support applications involving complex flow regimes, multiphase flows, and structural behaviour under varying conditions. Flexibility for future upgrades is essential, including the potential to incorporate temperature and scalar concentration measurements. The equipment must demonstrate proven reliability, accuracy, and repeatability, and be suitable for intensive research use. Full installation, calibration, commissioning, and user training are required, along with comprehensive documentation and ongoing technical support. The system must integrate seamlessly with existing laboratory infrastructure and contribute to enhancing the Department’s research capabilities and output.Mobile Röntgengeräte Oldenburg
Klinikum Oldenburg AöROldenburgBeschaffung von Mobilen Röntgengeräten für das Klinikum Oldenburg AöRRöntgenaufnahmeplatz & mobiles Röntgengerät
Vivantes - Netzwerk für Gesundheit GmbHBerlinDeadline: Sep 18Zum ausgeschriebenen Leistungsumfang gehört auch die Demontage und fachgerechte Entsorgung der Altanlage, die Lieferung, Montage und Inbetriebnahme der Neusysteme. Die Lieferung muss ca. 6-8 Wochen nach Abruf erfolgen. Die Maßnahme umfasst darüber hinaus sämtliche für die Installation und Inbetriebnahme erforderlichen baulichen, technischen und kosmetischen Anpassungen gemäß der als Vergabeunterlage beigefügten "Funktionalen Leistungsbeschreibung Austausch von zwei Röntgengeräten". Diese beschreibt die Anforderungen an die Kostengruppen 300, 400 und 600. Nach Abschluss der Arbeiten ist eine voll funktionsfähige, betriebsbereite und den aktuellen Anforderungen entsprechende Nutzung sicherzustellen.Digital 2D mammography unit
Public Health Institution General Hospital GevgelijaGevgelijaDeadline: Sep 07Mammography unit with digital detector, acquisition workstation, and diagnostic workstation, according to the specifications.DIGITAL MAMMOGRAPHY SYSTEM 2D
Public health institution Health Center KratovoKratovoDeadline: Sep 07DIGITAL MAMMOGRAPHY SYSTEM 2D Minimum Product Characteristics No. Specification Item 1 Bucky 1.1 Motorized vertical displacement range ≥ 55 cm to ensure easy patient access in sitting, lying, and standing positions. 1.2 Two touchscreen control panel monitors for adjusting position and compression, one on each side. 1.3 Anti-scatter grid with a density ≥ 30 l/cm. 1.4 System for additional breast retraction into the acquisition field for better analysis. State the name of the offered option. 2 Generator 2.1 Built into the stand of the device due to space limitations. 2.2 High-frequency generator ≥ 100 kHz. 2.3 Maximum power ≥ 4.5 kW. 2.4 Maximum mAs value ≥ 600 mAs to obtain high-quality images even for high-density and large-sized breasts. 2.5 Maximum mA value ≥ 120 mA. 2.6 kV range: minimum range from 23 to 35 kV. 2.7 Separate exposure mode for breasts with implants. 2.8 Automatic power supply voltage compensation. 3 X-ray Tube Assembly Holder 3.1 Motorized rotation range ≥ 315°. 3.2 Isocentric motorized rotation of the C-arm so that the center of the detector always remains at the same height, reducing patient positioning time. 3.3 Heat capacity of the X-ray tube assembly holder ≥ 700 kHU. 3.4 Source-to-image receptor distance (SID) ≥ 65 cm to allow higher geometric resolution and easier patient positioning. 3.5 Manual and automatic adjustment of breast compression. 3.6 Automatic motorized collimator adjustment. 3.7 Compression plate with minimum dimensions of 18 x 23 cm. 3.8 Compression plate with minimum dimensions of 24 x 30 cm. 3.9 Display of adjusted exposure parameters: kV, mAs, compression force, and breast thickness. 3.10 Automatic exposure control. 3.11 Automatic and manual release of compression plates after imaging. 3.12 Magnification factor minimum 1.6x. 4 X-ray Tube 4.1 Minimum two focal spots; small focal spot not larger than 0.1 mm; large focal spot not larger than 0.3 mm. 4.2 Rotating anode. 4.3 Anode rotation speed ≥ 9600 rpm. 4.4 Anode heat capacity ≥ 300 kHU. 4.5 Dual motorized filters. 4.6 Automatic and manual collimation. 4.7 Automatic identification of attached compression plates and FOV adjustment. 5 Detector 5.1 New generation digital detector made of amorphous selenium or amorphous silicon with cesium iodide. 5.2 Active area size of the detector minimum 230 mm x 295 mm. 5.3 Image matrix resolution minimum 2800 x 3580 pixels. 5.4 Pixel size ≤ 85 µm. 5.5 Must be capable of operating within a minimum temperature range of 13°C to 35°C to ensure seamless system operation under local conditions. 5.6 A/D conversion minimum 16 bit. 5.7 Spatial resolution minimum 6 lp/mm. 6 Acquisition Station 6.1 Computer with minimum 8GB RAM. 6.2 Internal storage (Hard drive or SSD) minimum 1TB size. 6.3 Internal storage capacity for a minimum of 40,000 images on the acquisition workstation. 6.4 DICOM monitor with a minimum size of 23 inches and minimum resolution ≥ 2 megapixels. 6.5 Saving images to CD/DVD in DICOM format or equivalent. 6.6 Measurement of lengths and distances. 6.7 Image orientation labeling. 6.8 Zooming into the region of interest on the image. 6.9 Adding comments to the image. 6.10 Image inversion. 6.11 DICOM MPPS or equivalent. 6.12 DICOM Worklist Management or equivalent. 6.13 DICOM Print or equivalent. 6.14 Required time for image display not longer than 6 seconds. 6.15 Required time to obtain the final image not longer than 10 seconds. 6.16 Separate post-processing mode for breasts with implants. 6.17 Noise reduction tool. 6.18 Protective lead glass integrated into the control console, featuring a height-adjustable workspace to ensure greater ergonomics for the operator, providing radiation protection equivalent to a minimum of 0.5 mm Pb. 7 Diagnostic Workstation 7.1 Computer with minimum 32GB RAM. 7.2 Internal storage (Hard drive or SSD) minimum 1TB size. 7.3 Two monitors with a minimum size of 21 inches, matrix minimum 2560x2048 pixels, minimum resolution ≥ 5 megapixels. 7.4 Saving images to CD/DVD. 7.5 DICOM Print or equivalent. 7.6 Automatic alignment of images. 7.7 Paired display tool with zoom, pan, and magnification features. 7.8 Inverted tissue display without a bright background. 7.9 Tools for annotation and measurements. 7.10 Display of breasts without empty space between them. 8 Additional Options 8.1 Upgradable with hardware and software for Digital Breast Tomosynthesis (DBT). 8.2 Upgradable with a stereotactic biopsy system. ________________________________________ Terms and Conditions: ● Marketing Authorization for the medical device issued by the Agency for Medicines and Medical Devices of the Republic of North Macedonia (MALMED), in accordance with the Law on Medicines and Medical Devices. ● Equipment warranty for a minimum period of 2 (two) years, during which the economic operator is obliged to provide free servicing and free replacement of spare parts according to the recommendations of the manufacturer of the offered device. ● Mandatory submission of a completed technical specification. ● Mandatory submission of a completed manufacturer's catalog/brochure with clearly highlighted features of the offered product according to the requirements and sequential numbers in the technical specifications. ● Bids that do not contain a catalog and detailed marked characteristics will not be evaluated. ● Upon delivery of the system, the Economic Operator must perform its installation, as well as technical training for the staff of the Contracting Authority on its usage. ● Provided service center in the Republic of North Macedonia, with a service technician who has completed training for the offered model and holds a valid certificate issued by the manufacturer.3D C Bogen
Universitätsklinikum Mannheim GmbHMannheimDeadline: Sep 17Beschaffung von 1x 3D C Bogen mobil für das Universitätsklinikum MannheimProcurement of a digital 2D mammography system
Public Health Institution Health Center "Dr. Ivan Georgiev" – PehchevoPehcevoDeadline: Sep 29Provided in the tender documentation
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 15. September 2026.
- Who is the contracting authority?
- The contracting authority is Universitätsklinikum Düsseldorf.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.