IHP GmbH - Leibniz-Institut für innovative MikroelektronikFrankfurt (Oder)TED
RF Vector Signal Generator
The procurement comprises the supply and delivery of one RF Vector Signal Generator with two integrated RF channels and two independent RF outputs. The scope of supply includes the equipment, all standard components and accessories required for proper operation, as well as the necessary software. The equipment shall meet the technical min...
Angebotsfrist: 06. Oktober 2026Typ: Ausschreibung
Messtechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- IHP GmbH - Leibniz-Institut für innovative Mikroelektronik
- Veröffentlicht:
- 06. September 2026
- Frist:
- 06. Oktober 2026
- Thema:
- Messtechnik
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The procurement comprises the supply and delivery of one RF Vector Signal Generator with two integrated RF channels and two independent RF outputs. The scope of supply includes the equipment, all standard components and accessories required for proper operation, as well as the necessary software. The equipment shall meet the technical minimum requirements specified in the service description. These include, in particular, a frequency range of at least 100 kHz to 44 GHz for each RF channel, high frequency and phase-setting resolution, defined requirements for output power, accuracy and spectral purity, and low phase noise. The generator shall also provide integrated wideband baseband generators with I/Q functionality, extensive waveform memory, fast LAN streaming, trigger and marker functionality, and interfaces for external reference and I/Q signals. Further requirements include Ethernet and USB interfaces, an integrated display, external device control, frequency and level sweep functionality, and a warranty period of at least two years, including required calibrations and documentation. Compliance with the technical requirements shall be demonstrated by submission of valid manufacturer documentation and a datasheet.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten49 Angaben erfasstUnterlagen
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten3 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten6 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
8Two Source Measurement Units (SMUs)
IHP GmbH - Leibniz-Institut für innovative MikroelektronikFrankfurt (Oder)Frist: 17. Sept.Art der Leistung Supply of two two-channel Source Measure Units (SMUs) Umfang der Leistung he scope of supply comprises the delivery of two two-channel Source Measure Units (SMUs). The supplied devices shall meet, at a minimum, all technical specifications and requirements defined in Section 2 of target designation. Devices exceeding the specified minimum requirements are also acceptable. The scope includes all components, accessories, documentation, and equipment necessary for the proper operation of the SMUs in accordance with the specified requirements.8-channel Arbitrary Waveform Generator (AWG)
IHP GmbH - Leibniz-Institut für innovative MikroelektronikFrankfurt (Oder)Frist: 17. Sept.Art der Leistung Procurement of an eight-channel Arbitrary Waveform Generator (AWG) meeting or exceeding the minimum technical specifications specified in Section 2 of the target designation. Umfang der Leistung The scope of supply includes the delivery of one eight-channel Arbitrary Waveform Generator (AWG) in accordance with the technical specifications specified in Section 2 of the target designation. The scope also includes all components, accessories, software, documentation, and licenses required for the proper operation of the device. Devices exceeding the specified minimum requirements are acceptable.An Anechoic Radio Frequency (RF) Chamber
Tampere University Foundation srTampereFrist: 07. Sept.Tampere University (thereinafter also "TAU" or "Contracting Authority" calls for tenders for an Anechoic Radio Frequency (RF) Chamber for Hervanta Campus' Sähkötalo. The procurement concerns an Anechoic RF Chamer (hereinafter referred to as "Chamber") for wireless communication technology, to be integrated into the WICO research environment and primarily used by the Tampere Wireless Research Center. The facility will be used for conducting Over-The-Air (OTA) antenna measurements, supporting advanced research and experimental validation in wireless communications. The chamber will enable research on current and future wireless systems and will further strengthen the existing high-level research in the field. The object of the tender process is described in more detail in the invitation to tender documents. A dedicated space has been allocated for both the chamber and an adjacent control room. Detailed layouts and spatial specifications are provided in the appendices to this tender. In addition, a separate appendix outlines the existing measurement equipment that will be installed and utilized within the new chamber. The chamber will be constructed within the Sähkötalo building, in the F-wing. The chamber is effectively located at the ground-floor level, allowing convenient access through large doors. This facilitates the transportation and installation of sizeable chamber components and measurement equipment. The selected supplier will be required to conduct a site survey promptly after contract signing. The purpose of the survey is to verify all relevant dimensions, environmental conditions, and technical details necessary for the design and installation of the chamber. Access to the site during the renovation phase will require coordination with the main construction contractor (details are provided after the contract has been signed). It is expected that participation in a mandatory construction site safety training (approximately one hour) will be required priorTest Vector Generators’ (TVG) corrective and evolutive maintenance
European Union Agency for the Space ProgrammePragueFrist: 23. Sept.The objective of this procurement procedure is to conclude a Framework Contract (hereinafter referred to as “the Contract”, “Framework Contract”, or “FWC”) for the maintenance of the Public Regulated Service (PRS) Test Vector Generators (TVG). The TVG is a tool (hardware and software) used to generate PRS Test Vectors for User Segment (US) in order to validate PRS US equipment (e.g. PRS Receivers and PRS Security Modules). So far, three (3) TVG units have been procured by EUSPA: two are currently deployed in Italy and one in France. For the purpose of the Contract to be awarded, ‘maintenance’ shall cover both: • corrective maintenance (i.e. resolving defects as raised by EUSPA); and • evolutive maintenance (i.e. implementing updates as driven by the needs of the Galileo Programme).Microfluidics-Based Droplet Generator
Trinity College Dublin the University of Dublin_336DublinThe proposed instrument shall be a microfluidics-based droplet generation system designed for the encapsulation of biological and biochemical materials such as living immune cells within highly stable, picoliter-volume droplets. The system MUST support downstream applications including continued cell culture followed by single-cell analysis by flow cytometry pipelines.Signal of Change for FOLUR Project Indonesia
UNDPJordanFrist: 11. Sept.Tender Reference: RFP/UNDP/ PRC0188987/029/2026 – Signal of Change for FOLUR Project Indonesia A pre-bid conference will be held on:Date and Time: 31 August 2026 10:00 PM Jakarta TimeLink to the online conference: https://undp.zoom.us/meeting/register/yt19OsurSJ6A9W4Ck3LQvgMeeting ID: 893 5156 3087Password: 043520 Please indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDP IndonesiaProcurement UnitLight RFQ: Replace the battery for 110KVA Perkins Generator
ILONepalFrist: 27. Aug.Dear Bidder, The International Labour Office (hereinafter the “ILO”) is pleased to invite your company to submit an offer for this RFQ. To enable you to prepare and submit a bid, please refer to the attached document in the attachment area. The ILO must receive your offer no later than the deadline specified at the ILO e-Sourcing Platform (Jaggaer). Late offers shall be rejected. You may submit an offer to the ILO provided that your organization is qualified, able, and willing to deliver the goods, works, and/or services specified in this RFQ. Participation in this RFQ indicates acceptance of the Terms and Conditions applicable to ILO Contracts. Failure to comply with the requirements of this RFQ may render a bid ineligible for consideration. We look forward to receiving your Bid. Best regards, ILO ProcurementGenerator Preventive Maintenance and Servicing Services – UNDP Jos Office
UNDPJordanFrist: 03. Sept.Consultancy firm for Generator Preventive Maintenance and Servicing Services – UNDP Jos OfficePlease indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. [UNDP OFFICE NIGERIAPROCUREMENT UNIT]
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 06. Oktober 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist IHP GmbH - Leibniz-Institut für innovative Mikroelektronik.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.